ICCAS OpenIR
Effects of rubber content and temperature on unstable fracture behavior in ABS materials with different particle sizes
Han, Y; Lach, R; Grellmann, W
2001-01-03
Source PublicationJOURNAL OF APPLIED POLYMER SCIENCE
ISSN0021-8995
Volume79Issue:1Pages:9-20
AbstractThe fracture behavior of ABS materials with a particle diameter of 110 nm and of 330 nm was studied using instrumented Charpy impact tests. The effects of rubber content and temperature on fracture behavior, deformation mode, stable crack extension, plastic zone size, J-integral value, and crack opening displacement were investigated. In the case of a particle size of 110 nm, the material was found to break in a brittle manner, and the dominant crack mechanism was unstable crack propagation. Fracture toughness increases with increasing rubber content. In the case of a particle size of 330 nm, brittle-to-tough transition was observed. The J-integral value first increases with rubber content, then levels off after the rubber content is greater than 16 wt %. The J-integral value of a particle diameter of 330 nm was found to be much greater than that of 110 nm. The J-integral value of both series first increased with increasing temperature until reaching the maximum value, after which it decreased with further increasing temperature. The conclusion is that a particle diameter of 330 nm is more efficient than that of 110 nm in toughening, but for both series the effectiveness of rubber modification decreases with increasing temperatures higher than 40 degreesC because of intrinsic craze formation in the SAN matrix at temperatures near the glass transition of SAN. (C) 2000 John Wiley & Sons, Inc.
KeywordAntibodies Instrumented Charpy Impact Test J-integral Value Plastic Zone Unstable Crack Propagation Brittle-to-tough Transition Crack Opening Displacement
Indexed BySCI
Language英语
WOS IDWOS:000165602600002
PublisherJOHN WILEY & SONS INC
Citation statistics
Cited Times:22[WOS]   [WOS Record]     [Related Records in WOS]
Document Type期刊论文
Identifierhttp://ir.iccas.ac.cn/handle/121111/78000
Collection中国科学院化学研究所
Corresponding AuthorHan, Y
Affiliation1.Chinese Acad Sci, Changchun Inst Appl Chem, State Key Lab Polymer Phys & Chem, Changchun 130022, Peoples R China
2.Univ Halle Wittenberg, Dept Mat Sci, D-06099 Halle, Saale, Germany
Recommended Citation
GB/T 7714
Han, Y,Lach, R,Grellmann, W. Effects of rubber content and temperature on unstable fracture behavior in ABS materials with different particle sizes[J]. JOURNAL OF APPLIED POLYMER SCIENCE,2001,79(1):9-20.
APA Han, Y,Lach, R,&Grellmann, W.(2001).Effects of rubber content and temperature on unstable fracture behavior in ABS materials with different particle sizes.JOURNAL OF APPLIED POLYMER SCIENCE,79(1),9-20.
MLA Han, Y,et al."Effects of rubber content and temperature on unstable fracture behavior in ABS materials with different particle sizes".JOURNAL OF APPLIED POLYMER SCIENCE 79.1(2001):9-20.
Files in This Item:
There are no files associated with this item.
Related Services
Recommend this item
Bookmark
Usage statistics
Export to Endnote
Google Scholar
Similar articles in Google Scholar
[Han, Y]'s Articles
[Lach, R]'s Articles
[Grellmann, W]'s Articles
Baidu academic
Similar articles in Baidu academic
[Han, Y]'s Articles
[Lach, R]'s Articles
[Grellmann, W]'s Articles
Bing Scholar
Similar articles in Bing Scholar
[Han, Y]'s Articles
[Lach, R]'s Articles
[Grellmann, W]'s Articles
Terms of Use
No data!
Social Bookmark/Share
All comments (0)
No comment.
 

Items in the repository are protected by copyright, with all rights reserved, unless otherwise indicated.